Selecting A Track - Aiwa XR-DV3M Operating Instructions Manual

Aiwa operating instructions dvd stereo system xr-dv3m
Hide thumbs Also See for XR-DV3M:
Table of Contents

Advertisement

Available languages

Available languages

STOPPING AND PAUSING
To stop play
Press s.
Play stops. The unit remembers the point at which play stopped.
("RESUME" appears on the display.)
To resume play from the point where it stopped
Press c.
To clear the point to be resumed
Press s again in stop mode.
"RESUME" disappears on the display. The resume memory is
cleared, and play starts from the beginning of the disc when c is
pressed the next time.
NOTE
• Under the default setting, the point to be resumed is also cleared
when the disc door is opened, the power is turned off, or the
function is switched.
• For DVDs, the point to be resumed is cleared when "TV Aspect"
setting is changed. (See "TV ASPECT", page 45.)
• Set up can be changed so that the resume memory is retained
even after the conditions described above. (See "DISC
RESUME", page 47).
• The resume function is not available for a VCD with the PBC
function turned on. To turn off PBC, see "PLAYING A VCD
WITHOUT USING PLAYBACK CONTROL", page 20, and "PBC",
page 47.
To pause play
Press a.
To resume play, press c.
NOTE
For DVDs, pressing ENTER also starts or resumes play.
REMOVING THE DISC
Stop play, and press zOPEN/CLOSE.
The disc door opens so that the loaded disc can be removed.
After removing the disc, press zOPEN/CLOSE again to close
the disc door.

SELECTING A TRACK

TITLE
MENU
CURSOR
ENTER
vRETURN
USING THE SOFTWARE SPECIFIC MENU
This unit supports menu interfaces that are contained in some
DVD or VCD software. For DVDs or VCDs with such menus, the
menu screen may automatically be displayed on the monitor screen
after first loading the disc.
DVDs
1 Move CURSOR on the main unit i, k, j, or l,
or press i/k/j/l on the remote control to select
your desired program.
2 Press ENTER to start play.
To display the menu
Press TITLE or MENU.
VCDs with the PBC function
Press the numbered buttons on the remote control
to select your desired program.
To display the menu
Press vRETURN.
NOTE
The contents and operation of the software specific menu vary
with the disc. Follow the instructions on the disc and on the menu
screen.
TITLE
0-9,+10
i/k/j/l
MENU
ENTER
vRETURN
En
19
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents