Listening To External Sources; Viewing Pictures Of External Source - Aiwa XR-DV3M Operating Instructions Manual

LISTENING TO EXTERNAL
SOURCES
VIDEO
TO PLAY THE EQUIPMENT CONNECTED
TO THE AUDIO IN JACKS
1 Press VIDEO.
"VIDEO" appears on the display.
2 Play the connected equipment.
NOTE
When connecting monaural sound source, connect the sound
source to either the AUDIO IN L (left channel) or AUDIO IN R
(right channel) jack. The sound will be heard only from the speaker
unit corresponding to the jack used.
TO PLAY THE EQUIPMENT CONNECTED
TO THE AUX IN JACKS
1 Press AUX.
"AUX" appears on the display.
2 Play the connected equipment.
To adjust the volume level of the connected equipment
To adjust the volume level of the equipment connected to the
AUDIO IN jacks, press VIDEO, then press r or t repeatedly.
To adjust the volume level of the equipment connected to the AUX
IN jacks, press AUX, then press r or t repeatedly.
The volume level can be adjusted in 8 steps from MIN (minimum)
to MAX (maximum).
VIEWING PICTURES OF
EXTERNAL SOURCE
AUX VIDEO
To view pictures played on equipment connected to the VIDEO IN
jack, using the monitor screen of this unit, proceed as follows:
1 Press VIDEO.
"VIDEO" appears on the display.
2 Open the monitor and press MONITOR ON/OFF
to turn the monitor on, if it has been turned off.
3 Play the connected equipment.
NOTE
To listen to the sound played by the external source, connect it
also to the AUDIO IN jacks of this unit.
MOITOR ON/OFF
En
39
ENGLISH