Techmade VISION User Manual page 30

INSTRUCTIONS
1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a
charger (5V 1A) or PC and place the smartwatch
correctly on the charging base.
Notice:
1) Use the charging base only on a dry, flat and stable surface.
2) If there is an obstacle between the smartwatch and the
charging base, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do
not leave the device charging for whole nights). To avoid
damaging the device, use only the supplied charging base.
4) Do not use if the charging cable is damaged.
5) Disconnect the cable and the charging base when cleaning
the smartwatch, during a thunderstorm or during a prolonged
period of non-use.
6) Do not attempt to disassemble or modify the smartwatch
and charging base.
7) Do not twist or pinch the cable and charging base.
8) Do not attempt to remove or replace the battery. The