Using The Scan Key; Scan To E-Mail - Brother DCP-7060D Software User's Manual

Network Scanning

Using the Scan key

You can use (SCAN) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your computer.
Before you can use
connect the machine to your computer. If you installed the MFL-Pro Suite from the included CD-ROM then
the correct drivers and ControlCenter4 or ControlCenter2 are installed. Scanning by
the configuration on the Device Scan Settings screen of ControlCenter4 or Device Button tab of
ControlCenter2. (For Windows
Configuring Scan button settings on page 88 for Advanced Mode. For Macintosh, see SCAN on page 173.)
For details about how to configure the scan settings of ControlCenter4 or ControlCenter2 buttons and to
launch the application of your choice using
on page 171.

Scan to E-mail

When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the computer you
designated on your network. ControlCenter4 or ControlCenter2 will activate the default E-mail application on
the designated computer. You can scan and send a black and white or colour document from the computer
as an attachment.
a
Load your document.
b
Press (SCAN).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose E-mail.
Press OK.
e
Press a or b to choose the destination computer you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
f
Press Start.
The machine starts the scanning process.
(SCAN) on the control panel, you have to install the Brother MFL-Pro Suite and
®
, see Configuring Scan button settings on page 75 for Home Mode or
(SCAN), see ControlCenter4 on page 63 or ControlCenter2
13
(SCAN) follows
13
13
206