Sending Setup - Brother DCP-7060D Software User's Manual

Brother PC-FAX Software (MFC models only)

Sending setup

From the Brother PC-FAX Setup dialog box, click the Sending tab to display the screen below.
Outside line access

Enter a number here to access an outside line. This is sometimes required by local PBX telephone
systems (for example, dialling 9 to get an outside line in your office). For PC-Fax send, this number will be
applied and Dial Prefix settings in the function menu will be ignored.
 Include header
To add the header information you entered in the User Information tab to the top of your sent faxes, check
the Include header box. (See Setting up user information on page 95.)
 Network PC-FAX (For MFC-7360N, MFC-7460DN and MFC-7860DW)
Check Enable when sending a fax to an e-mail address using the PC-FAX function.
(Not necessary when the destination is a fax number.)
6
6
96