Page 1
Kaadas User manual www.kaadas.com Shenzhen kaadas intelligent technology co.,ltd reserves all rights for the final interpretation to this user manual. all design and specifications are subject to change without notice.
How to set up How to open 1.Add user PIN code 2.Add user Fingerprint Pin code …………………….6.1.1 M9-1 4.Delete user PIN code Fingerprint …………………6.1.2 5.Delete user Fingerprint 1. Add user PIN code 2. Add user Fingerprint Pin code …….…..………….6.1.1 3.
Page 4
NOTES The above component images are for reference only. they may be different depending on your model.
Page 5
2.Packing list and explosive view Please check all parts carefully according to the following list after opening the box. Number Item number Quantity Remark Outside escutcheon Inside escutcheon Mortise Screw package User manual Warranty card Mechanical kay 2 pieces of emergency kay Strike plate Installation template User card...
3.Prepare lock for installation Confirm door direction this product can be installed on 4 types of door directions Confirm door thickness 1.measure your door thickness and confirm the screw package fits your door. 2.factory default screw package is for 30-60mm door thickness, if it doesn't fit your door, please contact our dealer. Fix directional screws change side of directional screws.
Page 7
4Installation drill holes according to the installation template, and put the mortise inside the door. fix mortise screws. note: please make sure the dead bolt keep inside of the mortise during the installation install the though bolt guide and fix them on the outside escutcheon. Note:cut the key tailpiece and choose suitable though bolt guide according to door thickness.
Page 8
put connecting cable though the door, insert the key tailpiece into the holes on the mortise, keep the outside escutcheon close to the door. fix the mounting plate with screws. insert the connecting cable and mortise cable into the port of inside escutcheon, keep escutcheon close to the door.
Page 9
fix the two mounting screws. install the though bolt guide, spring and shaft handle insert the lever handle into the handle hole, fix the screws and rose cover. install batteries, battery cover, strike plate, then installation is finished note: please test whether the door can open and close smoothly after installation...
Page 10
4.10 turn the level handle and key to test whether the installation is successfully 5 How to set up product How to enter Master mode wake up the touchscreen with your paim. press [*] twice, input master pin code, and press [#] voice guide: "enter the management mode."...
Page 11
6.How to user the lock Under normal mod 6.1.1 Pin code opening 1.wake up the keypad with palm 2. input added user pin code, press [#] to confirm. voice guide : "verification succeed" 3. push down the level handle to unlock Note: users can input fake pin code before or after correct user pin code.
Page 12
6.1.3 card opening 1. put card (added) on the card reader area. voice guide: " verification succeed: after hearing the sound "di" 2. press down the level handle to unlock under safe mode under safe mode, it needs double verification to open the door (1) pin code + fingerprint (2) pin code+ card (3) fingerprint+ card...
Page 13
mechanical key unlock when batteries wear off, forget user pin code, or system error, you can use mechanical key to unlock 1. push up the keypad, insert the mechanical key into the key hole and turn the key, then you can turn level handle to unlock automatic/ manual mode 1.a-m switch is on the inside escutcheon.
Page 14
Dead lock 6.6.1 dead locking from outside under automatic mode, dead bolt will throw out in 1,5 second after door closed. voice guide: "door closed" 6.6.2 dead locking from inside under manual mode, press " multifunction button",to lock the door, voice guide: "door closed"...
Page 15
6.6.3 privacy mode hold" multifunction button"(privacy mode): main bolt will stretch out to lock the door no matter in automatic mode or manual mode when the door closed, the keypad will be locked, only can unlock by key or unlock from inside. 6.6.4 Emergency Unlock press "multifunction button"...
Page 16
Defense Mode ON /OFF 1.on: after closing the door from outside, keypad lights up, press " " button. voice guide: "defense on", the lock will alarm when someone open the door from inside. 2.off: defense mode will remove once there are someone open the lock in any ways from outside Restore factory settings in case of forgetting master pin code, you can find reset button on the bottom of inside escutcheon, keep pressing the reset button for over 5 seconds.
Page 17
note: when the power is lower than 4.8v, system will sound voice guide: note "low power, please replace the battery" after every time you open the lock successfully. in this situation, please change batteries asap. (do not use different types of batteries together or old and new batteries together) 6.10 how to change batteries...
Need help?
Do you have a question about the M9 and is the answer not in the manual?
Questions and answers