Biamp EASYCONNECT MPX 200 User Manual

USER GUIDE
EASYCONNECT MPX 200
PRESENTATION SYSTEM
How to setup EasyConnect MPX 200
EasyConnect MPX 200 is an innovative screen sharing hub with integrated charging, cable
management and control of the meeting room equipment. The system is plug-and-play
and pre-configured for a BYOD setup. Different setups can be applied with the
EasyConnect management console.
Software configuration guide
Evoko knowledge base will guide you through the process of setting up the
EasyConnect MPX 200. https://support.meetevoko.com/hc/en-us
Biamp strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
Biamp and EasyConnect MPX 200 are either trademarks or registered trademarks of Biamp Systems, LLC in the United States and other countries.
A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA
Press and hold any of the touch buttons for 5 second
until the a white light appears at port 4.
Connect that cable to your computer and open the
EasyConnect management console.
T: +1 503.641.7287 W: www.biamp.com
rev.1023