Related Manuals for Dynascan DW652LR5
Summary of Contents for Dynascan DW652LR5
- Page 1 DW652LR5 USER MANUAL 65″ Clean Back High Brightness Display 65″ Clean Back High Brightness Display 67901 | V2.00...
- Page 2 Contents Material Contents Declaration ........................ 2 Recycling and Energy Information ......................2 Declaration of Conformity ........................3 Safety Precautions ..........................5 Important Safety Information ........................7 Getting Started ............................9 Contents ............................. 9 Installing and Replacing Remote Control Batteries ................9 Installation.............................
-
Page 3: Material Contents Declaration
SJ/T-11363-2006 and EU 2011/65/EC. Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. -
Page 4: Declaration Of Conformity
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. -
Page 5: Déclaration De Conformité
à la conformité aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan Cet appareil est conforme à la directive 2014/53/UE émise par la Commission de la Communauté... -
Page 6: Safety Precautions
Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m; some abnormalities may be experienced when installed at an altitude above 2000m. -
Page 7: Précautions Relatives À La Sécurité
Précautions relatives à la sécurité PRÉ CAUTIONS N'installez pas installer à proximité de matériaux inflammables ou de sources de chaleur. Ne pas compromettre la sécurité de la fiche de mise à la terre. Pour éviter tout choc électrique ou la brûlure, ne démontez pas l'écran. Le produit peut normalement être utilisé... -
Page 8: Important Safety Information
Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs: ... - Page 9 Nettoyez l’arrière de l’écran LCD au moins une fois par mois afin d’éliminer la poussière et autres particules. Débranchez immédiatement l'écran LCD et contactez un réparateur professionnel certifié DynaScan dès que possible lorsque l'une des situations suivantes se produit : Cordon d'alimentation ou fiche d'alimentation endommagé.
-
Page 10: Getting Started
Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DW652LR5 Professional LCD. Power cable x1 pc. ... -
Page 11: Bien Débuter
Vérifiez que les accessoires ci-dessous sont fournis avec l’écran. Si l'un d'eux est manquant, veuillez contacter immédiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. É cran LCD DW652LR5 Professional. Câble d'alimentation x 1 Télécommande x 1 Guide de démarrage rapide x 1... -
Page 12: Installation
Installation Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. - Page 13 Orientation Take off the cover on the rear of display and the orientation sticker can be found inside, which is for distinguishing the direction of installation. Installation Location Do not install in a location with strong vibrations or dusty. ...
-
Page 14: Connecting To A Power Source
Connecting to a Power Source Take off the cover from the back of display. Using the power cable provided, plug it in the power inlet which shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. -
Page 15: Input/Output Terminals
Input / Output Terminals RJ-45 1 (IN): RJ45 network input connection. RJ-45 2 (IN): RJ45 network input connection. RS-232 (IN): RS232C network input connection for remote control from PC. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. -
Page 16: Powering On/Off The Display
Operating Instructions Powering On/Off the Display To turn on/off the display, take off the cover from the back of display first. Press the power switch on as shown in the diagram below. NOTE: The remote control only works when the power switch is ON. -
Page 17: Using The Remote Control
Using the Remote Control Connection using an External Sensor Kit (ESK302) Take off the cover from the back of display. Connect the ESK302 cable (optional kit) to the mini USB port, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. - Page 18 *Color and shape may vary by model. ITEM DESCRIPTION POWER Power On / Off MENU OSD On / Off Move the cursor up or change the setting of selected item. ...
-
Page 19: Using The Built-In Keypad
Using the built-in keypad ITEM DESCRIPTION MENU OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. DOWN Move the cursor down or change the setting of selected item. LEFT Exit the current selection. RIGHT Select the highlighted item. -
Page 20: Navigating The On Screen Display (Osd) Menu
Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items. *The change of each setting can only enable when you press “LEFT” (refer to p.14) to back to the last menu layer. - Page 21 2. Picture ITEM 1 ITEM 2 DEFAULT DESCRIPTION Adjusts the color temperature to preset or Color USER user determined values. (User, D55, D65, Temperature D93, Balanced) Adjust the red light level. Range 0 – 100.Note: The feature is only supported on User mode.
- Page 22 3. Brightness ITEM 1 ITEM 2 DEFAULT DESCRIPTION Brightness Setting :Fixed:screen brightness remains at one level. Timer:Screen brightness is determined by the time of day. Auto:Screen brightness is determined by an extension sensor kit (ESK). Mix:Mix Timer & Auto Auto Brightness Fixed Mode,Autosensor time screen brightness determined by an extension sensor kit...
- Page 23 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Region Time Zone Set the Time Zone. Date & Set the mode. Time Time Set the clock.Note: The internal clock will Current Time continue to function when the power is turned off. Current Date Set the date.
- Page 24 Note: When disabled, the remote control function can be enabled again from IR Control the control panel on the display or through the DynaScan “Display Manager” application. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage.
- Page 25 7. Information ITEM 1 ITEM 2 DEFAULT DESCRIPTION Resolution Input resolution. MCB Version The MCB version. FW Version The F/W version. Information OS Version The OS version. The Extension Thermal Kit (ETK302) is for Thermal Kit Temp. ambient temperature monitoring. Some functions may not be available for all models.
-
Page 26: Specifications
Specifications MODEL DW652LR5 LCD Panel Size 64.53 inches Native Resolution 3840 x 2160 Brightness 4000 cd/m² (Typ.) Contrast Ratio 1200:1 (Static) ; 1000000:1 (Dynamic) PANEL Response Time 9 ms (Typ.) Viewing Angle 178°/ 178° Life Time 100,000 hrs (Typ.) Panel Surface... -
Page 27: Input Mode
Input Mode Active Resolution Refresh Rate H Pixels V Lines 60 Hz 60 Hz 60 Hz 60 Hz 1024 60 Hz 1280 60 Hz 1280 60 Hz 1280 60 Hz 1280 1024 60 Hz 1366 60 Hz 1400 1050 60 Hz 1440 60 Hz 1600... -
Page 28: Pin Assignments
Pin Assignments RS-232 Input PIN No. NAME Connected to 7&8 Connected to 6 Connected to 4 Connected to 1&8 Connected to 1&7... -
Page 29: Troubleshooting
Cannot control the display Check whether the RS-232 cable is connected properly. remotely via RS-232. If you are still having trouble with your DynaScan DS² Professional LCD, contact your dealer or DynaScan directly for more assistance. - Page 30 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. ...
- Page 31 About SDM Install SDM on the display 1. Loosen screws and remove the SDM cover from the display. 2. Insert the SDM module into the display and fasten screws. Make sure the SDM properly installed to avoid causing the devise destruction.
- Page 32 Switch to SDM Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source. [ Input Source →Main →SDM ]...
- Page 33 Copyright © DynaScan Technology, Inc. All Rights Reserved.
Need help?
Do you have a question about the DW652LR5 and is the answer not in the manual?
Questions and answers