Precautions and general recommendations
This appliance is intended to be used in domestic and similar applications,
such as:
• the kitchen area for the staff of shops, offices and other working
environments;
• farms and by customers in hotels, motels and other residential-type
environments;
• bed and breakfasts;
• catering services and similar non-retail applications;
• public places in a supervised environment.
Appliance for internal use only. Place the unit away from water jets.
Always connect the water cooler to a water main that supplies drinking water only.
Before each installation, the unit must be sanitized by an authorized technician.
After installation, ensure that the unit is not resting on the power cable.
Check that the unit is level and that it is resting on a floor with sufficient load-bearing capacity, in an
environment that is suitable for its dimensions and its use.
Before any maintenance or cleaning operation is carried out, remove the plug from the socket or
disconnect the power supply.
Ensure that the product is not sited close to sources of heat.
To guarantee adequate ventilation, leave at least 10 cm of space around the unit.
Install the product in a clean, dry, well-ventilated environment. The product is designed to function in
environments with a temperature range of between 16°C and 32°C - Climate Class N.
Take care not to damage the cooling fluid circuit: it is filled with R290, which is a highly flammable gas.
It is essential to ensure that the tubes of the refrigerant circuit are not damaged.
Ensure that it is possible to disconnect the power supply either by removing the plug or via a two-pole
circuit-breaker, with an opening distance of the contacts that allows complete disconnection in the
conditions of overvoltage category III, placed upstream of the plug.
Check that the voltage shown on the serial number plate corresponds to the voltage being supplied
at the installation site.
The unit must not be cleaned with a water jet. Do not position other electrical equipment in the
immediate vicinity of the water cooler.
Turn off the main water inlet tap if the unit is not to be used for a long period.
Keep the areas surrounding the unit dry to avoid the risk of people slipping.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard. Do not use extension leads or adapters.
This appliance is intended to be used by persons (including children aged from 8 years)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
provided that they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance. The appliance is only to be installed in locations where it can be
overseen by trained personnel.
The appliance shall be protected by a ground-fault circuit interrupter.
This equipment is to be installed in compliance with the local plumbing codes. Water pipe
connections and fixtures directly connected to a potable water supply shall be sized, installed,
and maintained in accordance with federal, state, and local codes.
P R E M I U M W A T E R
3
Need help?
Do you have a question about the PUREZZA PREMIUM WATER Frizzante 80 Manual and is the answer not in the manual?