Summary of Contents for WaterLogic PUREZZA PREMIUM WATER Frizzante 80 Manual
Page 1
P R E M I U M W A T E R Use & Maintenance Manual - ENGLISH version Frizzante 80 Manual Frizzante 80 Electronic Before installing or using the product read the precautions and general recommendations inside.
P R E M I U M W A T E R Precautions and general recommendations This appliance is intended to be used in domestic and similar applications, such as: • the kitchen area for the staff of shops, offices and other working environments;...
Page 4
P R E M I U M W A T E R In connection with the performance of work activities and the task of installation and maintenance of equipment, personal protective equipment shall be used according to the directions and obligations according to the current local regulations on safety in the workplace.
Page 5
P R E M I U M W A T E R Index • PRE-DELIVERY INSPECTION • RECOMMENDATIONS FOR SAFEGUARDING THE ENVIRONMENT • CERTIFIED • DESCRIPTION OF THE UNIT • DESCRIPTION OF FRIZZANTE 80 MANUAL • DESCRIPTION OF FRIZZANTE 80 ELECTRONIC •...
P R E M I U M W A T E R Pre-Delivery Inspection (PDI) Before delivering the machine to your customers site for installation, it is important you perform a pre-delivery inspection. This is to ensure that the machine is functioning correctly when it arrives to you and that there are no defects with the machine.
P R E M I U M W A T E R Recommendations for safeguarding the environment Packaging materials The packaging materials are 100% recyclable. Please follow the local guidelines on waste disposal. For safety reasons keep the packaging material out of the reach and sight of children.
P R E M I U M W A T E R Certified For the list of product and company certifications contact Purezza™. Safety conditions This manual contains paragraphs on security conditions, preceded by titles to draw ones’ attention: NOTE: These titles are used to highlight important information regarding installation, operation and maintenance.
P R E M I U M W A T E R Description of the unit A new countertop water-cooler with an elegant, modern design, so cool. These are its main qualities: • A modern design using materials such as black plexiglass and stainless steel.
Page 10
P R E M I U M W A T E R Frontal view - mod. Manual Removable top cover Cold water dispensing nozzle Sparkling water dispensing Drip tray with grid nozzle Room temperature water Adjustable feet dispensing nozzle...
Page 11
P R E M I U M W A T E R Frontal view - mod. Electronic Removable top cover Cold water dispensing nozzle Sparkling water dispensing Drip tray with grid nozzle Room temperature water Adjustable feet dispensing nozzle...
P R E M I U M W A T E R Rear view Ice bank inlet pipe joint (ø8mm) inlet pipe joint (ø8mm) Thermostat Power button Ice bank level Ice bank overflow Drinking water inlet pipe joint IEC inlet power cord (ø8mm) Energy saving button (only on Electronic mod.)
Page 13
P R E M I U M W A T E R Description of Frizzante 80 Manual Cold sparkling water Room temperature water Cold still water Pull forward the tap knob to start the dispensing process. Bring it back up to stop it.
Page 14
P R E M I U M W A T E R Description of Frizzante 80 Electronic Cold sparkling water dispensing button Room temperature water dispensing button Cold water dispensing button ENERGY SAVING (STAND BY) button* (page 12, item n° 9) BLUE led*: Fixed - POWER ON Quick flashing - NO WATER alarm (FIZZ mod.)
Page 15
P R E M I U M W A T E R Functions of the volumetric keypad The water cooler is equipped with a VOLUMETRIC dispensing system. The dispensing quantities are easily PROGRAMMABLE during installation. On turning on the unit, the default settings are as follows: a short pressure of the buttons dispense 200 ml of water (a cupful), whereas a long pressure dispense 1000 ml (1 litre).
Page 16
P R E M I U M W A T E R “NO GAS” ALARM: This alarm is triggered when the CO pressure switch sends the NO GAS signal. In this case, the associated BLUE led L.1 starts to flash slowly and all of the dispensers continue to work as normal, but the carbonation is not optimal.
Page 17
P R E M I U M W A T E R Technical Features - dimensions (mm) [mod. Frizzante 80 Manual] 339mm 86mm 13,35in 3,38in 443mm 101mm 140mm 3,98in 5,51in 17,43in 620mm 24,4in [mod. Frizzante 80 Electronic] 339mm 72mm 181,4mm 13,35in 517mm 2,83in...
Page 18
P R E M I U M W A T E R Technical data sheet Frizzante 80 Cooling capacity 80 lt/h Max continuous dispensing 45 lt Water temperature 5°-12°C * Cooling system Single-coil ice bank Tank capacity 15 lt Ice bank 5 kg Pump Professional rotary carbonation pump...
P R E M I U M W A T E R Installation Unpacking Remove the two plastic tape and the internal packing. Carefully check that the unit has not been damaged during transport. Any signs of damage must be reported to the forwarder immediately.
P R E M I U M W A T E R Siting the unit Wear safety gloves when handling the unit. The unit must be handled by two people. Site the unit away from sources of heat. Do not place on inclined surfaces. Leave at least 10 cm around the unit to allow for aeration.
Page 21
P R E M I U M W A T E R Connection to the mains water supply CAUTION! To connect the water cooler to the mains water supply, you will need to use a new set of connectors (joints, gaskets and pipes). Do not use a set of connectors that has already been used elsewhere.
P R E M I U M W A T E R Electrical connection The connections must comply with local regulations. The grounding of the unit is a legal requirement. Connect the power cord to a socket. Position the electrical socket so that the appliance can be disconnected from the mains after installation.
Page 23
P R E M I U M W A T E R Open the machine To have access inside the water cooler, remove the top cover by unscrewing n.6 screws on the back side (Fig. 23.1) and n.1 screw on the top (Fig.
Page 24
P R E M I U M W A T E R Installation of the CO cylinder Once the unit is connected to the mains water and electricity, and the ice-bank tank has been filled, you can install the E290 food-grade carbon dioxide (CO ) cylinder.
P R E M I U M W A T E R Handling the gas cylinders All of the cylinders must be fitted with a valve protector cap, which must be on tight at all times when the cylinder is not in use. Valve connection The cylinders must be handled with care.
Page 26
P R E M I U M W A T E R Filtration Sterilizing UV LED The unit is equipped with an ultraviolet (275 nm) sterilizer filter at the water entry point to prevent back-contamination. The light emitted by the special 5W UV LED is lethal to any microorganisms (bacteria, viruses, molds, algae, etc.);...
CAUTION! The installation, maintenance, sanitising and any repair must be performed by qualified persons trained by Waterlogic or their authorized distributors only. Routine maintenance operations Customer Service & Technical Dept. All the operations must be carried out exclusively by qualified technical personnel.
Page 28
P R E M I U M W A T E R Cleaning and control of Every 6 months Control and eventually internal parts remove accumulation of dust, sand or similar, with a disposable cloth or a vacuum. Cleaning of Refrigeration Every 6 months Remove dust from the condenser...
P R E M I U M W A T E R Service history Installation Technician Date Notes Signature Maintenance Technician Date Notes Signature...
Page 31
P R E M I U M W A T E R Waterlogic Trading Ltd +353 1 293 1960 www.waterlogic.com WLI Trading Limited, Second floor, Suite 4, Beacon Court, Sandyford, Co. Dublin, Ireland For technical support Email: support@waterlogicsupport.zendesk.com 161180 EN - Rev. 01 - 05/2024...
Need help?
Do you have a question about the PUREZZA PREMIUM WATER Frizzante 80 Manual and is the answer not in the manual?
Questions and answers