Call Routing - Bizfon 2000 Administrator's Manual

Bizfon Manual II: Administrator's Guide
The Add Entry page consists of the following components:
The Enable Registration checkbox selection is used to enable
the registration to the corresponding master device.
The Trunk Name text field requires the SIP trunk name for the
corresponding connection. System suggests you to start the SIP
trunk name with the "SIP_Trunk_" words, according to the
automatic prefix used for the SIP trunks on the Bizfon, however
this is not mandatory.
The User Name text field requires the authentication user
name. The field in front of this text field displays the default non-
editable prefix for SIP trunks: "SIPTrunk_".
The Password text field requires the authentication password.
Please Note: The User Name and Password should match
both on master and slave Bizfons for the successful SIP trunk
establishment.
The Master device IP text field requires the IP address of the master device.
The Master device port text field requires the SIP port number of the master device.
The Registration State field displays information whether the slave device is registered on the master or not.
The Registration Date/Time field displays the time and the date of last registration on the master's device.

Call Routing

The Call Routing service simplifies the calling procedure for Bizfon users, i.e., different types of calls (internal, SIP, PSTN or IP-PSTN) can be
placed in the same way. SIP registration is not needed for extensions to make routing calls.
The Call Routing page offers the following components:
•
When the Route all incoming SIP calls to Call Routing
checkbox is disabled, for all incoming SIP calls Bizfon will
first search the incoming SIP address in the
Management table. If found, the incoming SIP call will ring
on the corresponding extension. If not found, Bizfon will
look for a matching routing rule in
When the Route all incoming SIP calls to Call Routing
checkbox is enabled, for all incoming SIP calls Bizfon will
directly look for a matching routing rule in
table and will ignore the possible matches in the
Extensions Management
•
The Call Routing Table link leads to the Call Routing
table where routing patterns may be manually defined.
•
The Local AAA Table link leads to the page where local
AAA (Authentication,
database can be managed.
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
Extensions
Call Routing table.
Call Routing
table.
Authorization, and Accounting)
Fig. II-124: SIP Trunk Settings – Trunks to Master Devices – Add Entry page
Administrator's Menus
Fig. II-125: Call Routing page
66