BenQ DV3750 Installation Manual page 2

5. Connect one end of the speaker
cables to the connectors on the
speakers. Note that the wire with a
gray stripe should be connected to
the red connector, and the cable
without a gray stripe to the black
connector.
6. Connect the other end of the
speaker cables to the connectors on
the display. Note that the wire with
a gray stripe should be connected to
the red connector, and the cable
without a gray stripe to the black
connector.
7. Install the rubber covers onto the
speakers.
8. The illustration shows the state of
completion.
9. Revert the display to its upright position and reconnect all audio, video
signal and power cables.
If you need more information about how to connect these cables, please
refer to the User's Manual of the display.
To achieve 2.1-channel sound effect, you need to connect
an optional subwoofer to the SUBWOOFER output of the
display and use it in combination with the DV3750 external
speakers.