1. Manuals
  2. Brands
  3. GREAT PLAINS Manuals
  4. Farm Equipment
  5. STEALTH PRO CDH000-10
  6. Operator's manual

GREAT PLAINS STEALTH PRO CDH000-10 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Great Plains
OPERATOR MANUAL
MODEL CDH000-10
Table of Contents
Original Instructions
!
Read the operator manual entirely. When you see
this symbol, the subsequent instructions and
warnings are serious - follow without exception.
Your life and the lives of others depend on it!
Illustrations may show optional equipment not
supplied with standard unit.
151-368M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STEALTH PRO CDH000-10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GREAT PLAINS STEALTH PRO CDH000-10

Summary of Contents for GREAT PLAINS STEALTH PRO CDH000-10

  • Page 1 Table of Contents Great Plains OPERATOR MANUAL MODEL CDH000-10 151-368M Original Instructions Read the operator manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Illustrations may show optional equipment not supplied with standard unit.

  • Page 2: Machine Identification

    Machine Identification Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new manual. If you or the dealer have added options not originally ordered with the machine, or removed options that were originally ordered, the weights and measurements are no longer accurate for your machine.
  • Page 3 Printed 07/09/2024 | English Great Plains reserves the right to revise and improve its products at any time. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The content of this publication may be...
  • Page 4 Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, DrillCommand, Max-Chisel, Row-Pro, Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press. Registered trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Trill, Ultra-Till, Whirlfilter, and Yield-Pro.
  • Page 5 Preparation and Setup....11 Drive Chains ......33 Great Plains | 151-368M | 07/09/2024...
  • Page 6 Hydraulic Schematic ..... 42 Warranty ......43 Great Plains | 151-368M | 07/09/2024...

  • Page 7: Description Of Unit

    Table of Contents Introduction Introduction  Using This Manual Great Plains welcomes you to its growing family of new product owners. Your drill has been designed This manual familiarizes you with safety, assembly, with care and built by skilled workers using quality...

  • Page 8: Owner Assistance

    Great Plains Service Department If you need customer service or repair parts, contact 1525 E. North St. a Great Plains dealer. They have trained personnel, P.O. Box 5060 repair parts and equipment specially designed for Salina, KS 67402-5060 products.

  • Page 9: Safety Information

     Non-Great Plains components on this machine may machine and advises on how to avoid it. contain additional safety information not found in this The notice symbol indicates a potential for manual.

  • Page 10: Machine Use

    Avoid contacting overhead obstructions such as low bridges, overpasses, and power lines.  Do not operate near ditches, holes, steep slopes, embankments, or other surfaces which may collapse under the machine’s weight or tip the machine over. Great Plains | 151-368M | 07/09/2024...
  • Page 11  Detach the tractor. Secure the implement using  Stay clear of and never step over any rotating parts. blocks. Great Plains | 151-368M | 07/09/2024...

  • Page 12: Safety Decals

    Read and follow decal directions. Keep all safety decals clean and legible. Replace all damaged, faded, or missing decals. Order new decals from your Great Plains dealer. Refer to this section for proper decal placement. When ordering new parts or components, also request corresponding safety decals.

  • Page 13: Reflectors: Amber

    Keep others away during operation. Safely support and secure implement before repairs are made. 818-719C WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov On top of tongue; 1 total See “Safety Information” starting on page 3. Great Plains | 151-368M | 07/09/2024...
  • Page 14 On each wheel; 2 total MOVING CHAIN HAZARD To prevent serious injury from moving chain: DO NOT operate with enclosure missing 818-518C Dual Seed: On outside of box end wall, under both covers; 2 total Great Plains | 151-368M | 07/09/2024...
  • Page 15 HAZARD To Prevent Serious Injury or Death: Do NOT exceed 20 mph maximum transport speed. Loss of vehicle control and/or machine damage can result. 818-337C Rev. B On on top of tongue; 1 total Great Plains | 151-368M | 07/09/2024...
  • Page 16 Stealth Pro Table of Contents Safety Decals Danger: Possible Chemical Hazard 32761 838-467C Under lid of Small Seeds box; 1 total See “Field Operation” on page 20. Great Plains | 151-368M | 07/09/2024...

  • Page 17: Preparation And Setup

    Check that all safety decals and reflectors are correctly located and legible. Replace if damaged. See “Safety Decals” starting on page 6.  Inflate tires to pressure recommended and tighten wheel bolts as specified. See “Appendix” on page 41. Great Plains | 151-368M | 07/09/2024...
  • Page 18 If heights are inch bolt , safety washer , lock different, readjust accordingly. washer and nut . Then attach chain to tractor drawbar. 5. Store jack on top of tongue. Jack Storage Position 13940 Great Plains | 151-368M | 07/09/2024...

  • Page 19: Hydraulic Hookup

    Great Plains hydraulic hose connectors have color 3. Once hydraulic hoses are routed through the coded handle grips to help you hookup hoses to your tongue, attach color-coded grips to the correct tractor outlets.

  • Page 20: Bleeding Hydraulics

    5. Retract cylinders. Extend cylinders again and hold remote lever on for one more minute. Repeat this step two more times to completely bleed system. Great Plains | 151-368M | 07/09/2024...

  • Page 21: Position Seed Cup Doors

    For more assistance and calculated material 1, 2, 3 or 4. Drive type is determined by the handle rates, download the Great Plains app. on the gearbox cover at left front of the drill. Move the Accurately obtaining the desired seed population...
  • Page 22 See page 15 for more information. Small Seeds Box Set the seed rate handle. See “Seed Rate Handle” on page 16. If any optional seed boxes are loaded, disconnect their drive or set their rate to zero. Great Plains | 151-368M | 07/09/2024...
  • Page 23 TargetRate  ---------------------------------- - NewScale PreviousScale MeasuredRate Once finished, store calibration crank, re-engage hub if locked-out, reinstall any removed chains or sprockets, and reconnect seed hoses. Great Plains | 151-368M | 07/09/2024...

  • Page 24: Seeding Adjustments

    Stealth Pro Table of Contents Preparation and Setup  Seeding Adjustments Great Plains | 151-368M | 07/09/2024...
  • Page 25 Stealth Pro Table of Contents Preparation and Setup  Grass Seed Rates Great Plains | 151-368M | 07/09/2024...

  • Page 26: Field Operation

    You may be severely injured or killed by being crushed between the tractor and drill. Do not stand or place any part of your body between drill and moving tractor. Stop tractor engine and set park brake before installing pins. Great Plains | 151-368M | 07/09/2024...

  • Page 27: Cylinder Locks

    With drill fully raised place lock over rod of cylinder and secure in place with pin and clip. Lock-out Hub 14741 Cylinder Locks 21706 NOTE: The cylinder locks can be engaged or disengaged only after the drill is fully raised. Great Plains | 151-368M | 07/09/2024...

  • Page 28: Acre Meter Operation

    Down Arrow - Decrements current value. If the current screen only displays a reading, then arrow buttons can be used to reset current reading or for navigation. Great Plains | 151-368M | 07/09/2024...
  • Page 29 Use the arrow buttons to increase or decrease the Battery Life scaling factor. Pressing Select will save the configuration and navigate to the P2 or SW screen. Displays the percentage of remaining battery life. Pressing Select navigates to screen PW. Great Plains | 151-368M | 07/09/2024...
  • Page 30 YES, pressing Select allows for a new Units of Measurement password to be entered. If displaying the status and status is NO, pressing Select navigates to the A1 screen. Displays the units of measurement used by the acre meter. Great Plains | 151-368M | 07/09/2024...

  • Page 31: Parking And Unhitching

    Do not adjust the jack angle without being hitched and connected to a tractor. Before operating the jack, make sure the foot (2) of the jack is parallel to the ground. Great Plains | 151-368M | 07/09/2024...

  • Page 32: Coulter Adjustments

    Coulter cutting depth is controlled by a depth control valve. The amount of coulter down force needed to cut a soil groove varies with soil conditions. Adding weight or shortening the coulter spring increases coulter down pressure and cutting force. Great Plains | 151-368M | 07/09/2024...

  • Page 33: Coulter Down Pressure

    Each opener spring can be adjusted for down springs to protect coulters from impact. pressure. This is useful when penetrating hard soil and for planting in tractor tire tracks. Great Plains | 151-368M | 07/09/2024...
  • Page 34 This maintains pressing action even if opener disks encounter obstructions or hard soil. Disk Scraper Adjustment 16153 To adjust scrapers, loosen 3/8 inch bolt and move scraper as needed. Great Plains | 151-368M | 07/09/2024...

  • Page 35: Disc Blade Adjustments

    Adjusting Disc Spacers 26385 3. To reduce the spacing between the discs (the normal case), move one spacer washer from the inside to the outside of the disc. 4. Re-assemble and check disc contact. Great Plains | 151-368M | 07/09/2024...

  • Page 36: Gauge Wheel Idler Adjustment

    Do not over-tighten chains. To do so will cause To adjust, loosen bolts on clutch tab . Slide tab excessive wear. forward or back to change point at which cam plates meet. When satisfied with adjustment, tighten bolts on clutch tab. Great Plains | 151-368M | 07/09/2024...

  • Page 37: Drive Train Operation

    To adjust idler sprocket, move top idler sprocket down into chain by loosening jam nut and screwing in adjustment stud . Tighten jam nut to maintain idler position. Idler Sprocket Adjustments 21782 Great Plains | 151-368M | 07/09/2024...

  • Page 38: Maintenance

    5. Clean out build up of seed treatment in feed cups. 6. Replace any worn, damaged or illegible safety decals. Order new decals from your Great Plains dealer. See “Safety Information” starting on page 3. Great Plains | 151-368M | 07/09/2024...

  • Page 39: Lubrication Maintenance

    Quantity = Coat thoroughly Grease Banks Fertilizer Tray Bearings 14753 12506 8 Hrs. 15 Hrs. Type of Lubrication: Grease Both ends of shaft Quantity = Until grease emerges Type of Lubrication: Grease Quantity = Until grease emerges Great Plains | 151-368M | 07/09/2024...
  • Page 40 Quantity: Coat thoroughly Move the seed rate adjustment handle back and forth to get oil into the square bore. Perform this with seed box empty, or handle may be difficult to set to 100. Great Plains | 151-368M | 07/09/2024...
  • Page 41 Quantity = Coat sprocket bore thoroughly Coulter Hub Bearings Type of Lubrication: Grease Quantity = Repack 13879 Seasonal One zerk per coulter; 15 total Type of Lubrication: Grease Quantity = Until resistance is felt Great Plains | 151-368M | 07/09/2024...
  • Page 42 (replace if needed) the rubber seals on gearbox drive and shifter shafts. Spread a small skim coat of anaerobic sealant ® (Loctite 525 or equivalent) to gear case mating surfaces before bolting them back together. Great Plains | 151-368M | 07/09/2024...

  • Page 43: Seed Box Agitator

    For seed rates, see seed rate decal on bottom side Without 118-899A of seed box lid. For lubrication points, “Lubrication small seeds, and Scheduled Maintenance” on page 33. With small seeds 118-900A To order the small seeds attachment, contact your Great Plains dealer. Great Plains | 151-368M | 07/09/2024...

  • Page 44: Seed-Lok ® Firming Wheels

    To order the Seed-Lok® firming wheels, contact your Great Plains dealer. Seed-Lok® Packages Part Number Seed-Lok® Assembly 122-193K Weight Option Weight Option Part Number Option CDH000-10 151-246A (70) See “Weights” on page 27. Great Plains | 151-368M | 07/09/2024...

  • Page 45: Troubleshooting

    Avoid overlap or gaps. passes. Loose soil and slippage will cause Soil conditions. variations in acres registered. Acre Meter not for your width of drill. See the parts manual. Actual field size different. Verify field size. Great Plains | 151-368M | 07/09/2024...
  • Page 46 Move adjustable divider to create more Adjustable divider not set evenly. evenly volume in areas that run out first. Be sure retainer clip is facing opposite Chain Debris, retainer clip way of chain travel. Great Plains | 151-368M | 07/09/2024...

  • Page 47: Torque Values Chart

    For assistance or information, contact your nearest 9.0 x 24" 8-Ply 40 psi 170 lb ft Rib Implement (276 kPa) (230 Nm) Authorized Farm Tire Retailer. ManufacturerWeb site Firestonewww.firestoneag.com Gleasonwww.gleasonwheel.com Titanwww.titan-intl.com Galaxywww.atgtire.com BKTwww.bkt-tire.com Great Plains | 151-368M | 07/09/2024...

  • Page 48: Specifications And Capacities

    2.4 bushels (84.6 L) Fertilizer 9.2 cubic feet (260.5 L) Dual Seed 10 bushels (352.4 L) End Wheel Tires 9.00 x 24 Tractor Requirements 75 horsepower (56 kw); one remote valve  Hydraulic Schematic Great Plains | 151-368M | 07/09/2024...

  • Page 49: Limited Warranty

    Great Plains reserves the right to make changes in materials or design of the product at any time without notice. This warranty is not valid unless the unit is registered with Great Plains within 10 days from the date of the original purchase.
  • Page 50 Table of Contents...
  • Page 51 Table of Contents...
  • Page 52 Great Plains, Mfg. 1525 E. North St. P.O. 5060 Salina, KS 67402...

Table of Contents