Setup; Pre-Installation Signal Strength Test; Connect To Home Network - Generac Power Systems PROTECTOR RG048 Instruction Manual

Standby generators liquid-cooled gaseous engine
Table of Contents

Advertisement

Submitted by NW Electrical
Job Name:
Self-Reliance Credit Union
General Information and Setup

Setup

Before installing the Mobile Link device,
perform the
Test
to determine if the existing Wi-Fi signal is
sufficient for use or if it must be boosted.
Pre-Installation Signal Strength
Test
NOTE: Most network routers automatically
broadcast their Wi-Fi network name every few
seconds. Network owners may choose to
disable broadcasting, making the home
network invisible.
1.
See
Figure
the proposed generator installation loca-
tion.
Figure 2-3. Test Wi-Fi Signal Strength
2.
Set up a mobile device (smartphone, tab-
let, or laptop) to detect Wi-Fi networks.
3.
See
Figure
work is being detected by the mobile
device. Observe the Wi-Fi signal strength.
B
Figure 2-4. Signal Strength Display
If the Wi-Fi signal is strong (B), the existing
network setup is acceptable. The Wi-Fi
module will operate from its location on the
generator.
If the Wi-Fi signal is weak (C) or fluctuating,
or the network is not available, the home-
owner may need to consider upgrading
their wireless router, or using Ethernet con-
nectivity as an alternative. Any signal
boosters present in the system (e.g. a
repeater) should also be tested and
upgraded if necessary.
6
Pre-Installation Signal Strength
2-3. Position a mobile device in
2-4. Verify the home Wi-Fi net-
C
Catalog Number:
7170
Notes: Usual lead time prox 2-3 weeks ARO
If the Wi-Fi signal is weak and the network
cannot be upgraded, the homeowner
should consider using the Ethernet connec-
tivity option as an alternative, or the cellular
based Mobile Link accessory.

Connect to Home Network

Successful connection to the home network
must occur before the user can access any of
the features in the Mobile Link application.
and communicate with the Mobile Link
servers.
Before Starting
Verify the generator is registered and acti-
vated.
To
activate
the
www.activategen.com
prompts as directed.
Installation and User’s Manual for Mobile Link
Type:
--
NWES24-21067
generator,
visit
and
follow
the
®
Index Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROTECTOR RG048 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Protector rg060Protector rg080

Table of Contents