Section 1: Safety Rules Introduction; Antenna Statement; Read This Manual Thoroughly; Safety Rules - Generac Power Systems PROTECTOR RG048 Instruction Manual

Standby generators liquid-cooled gaseous engine
Table of Contents

Advertisement

Submitted by NW Electrical
Job Name:
Self-Reliance Credit Union
Section 1: Safety Rules
Introduction
Thank you for purchasing this home standby
generator product accessory.
NOTE: This device complies with Part 15 of
the FCC Rules (and with Industry Canada
license-exempt RSS standard(s)). Operation
is subject to the following two conditions:
this device may not cause harmful interfer-
ence, and
this device must accept any interference
received, including interference that may
cause undesired operation.
NOTE: Changes or modifications made to this
equipment not expressly approved by the
manufacturer may void the FCC authorization
to operate this equipment.

Antenna Statement

Under Industry Canada regulations, this radio
transmitter may only operate using an
antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry
Canada.
interference to other users, the antenna type
and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP)
is not more than that necessary for successful
communication.
The information in this manual is accurate
based on products produced at the time of
publication. The manufacturer reserves the
right to make technical updates, corrections,
and product revisions at any time without
notice.
NOTE: Wi-Fi
Wi-Fi Alliance

Read This Manual Thoroughly

If any section of this manual is not understood,
contact Mobile Link customer support at 1-
855-436-8439 (CAN 844-843-9436) or visit
www.mobilelinkgen.com
ing, and servicing procedures. The owner is
responsible for correct maintenance and safe
use of the unit.
This manual must be used in conjunction with
all other supporting product documentation
supplied with the product and generator.
Installation and User’s Manual for Mobile Link
To
reduce
potential
radio
®
is a registered trademark of
®
.
for starting, operat-
®
Catalog Number:
7170
Notes: Usual lead time prox 2-3 weeks ARO
SAVE THESE INSTRUCTIONS for future ref-
erence. This manual contains important
instructions that must be followed during
placement, operation, and maintenance of the
unit and its components. Always supply this
manual to any individual that will use this unit.

Safety Rules

The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The alerts in this manual, and on tags
and decals affixed to the unit, are not all
inclusive. If using a procedure, work method,
or operating technique that the manufacturer
does not specifically recommend, verify that it
is safe for others and does not render the
equipment unsafe.
Throughout this publication, and on tags and
decals
affixed
to
the
WARNING, CAUTION, and NOTE blocks are
used to alert personnel to special instructions
about a particular operation that may be
hazardous
if
performed
carelessly. Observe them carefully. Alert
definitions are as follows:
NOTE: Notes contain additional information
important to a procedure and will be found
within the regular text of this manual.
These safety alerts cannot eliminate the
hazards that they indicate. Common sense
and
strict
compliance
instructions while performing the action or
service are essential to preventing accidents.
Type:
--
NWES24-21067
Safety Rules
unit,
DANGER,
incorrectly
or
with
the
special
1
Index Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROTECTOR RG048 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Protector rg060Protector rg080

Table of Contents