Table of Contents
Advertisement
Making Data Calls
12.12 Making Data Calls
USB Cable & Utility Software (MOGF01) lets you
transfer data between your phone and a computer or
handheld device. You can:
• Synchronise Phone Book and calendar
information between your phone and a computer
or PDA.
• Use your phone as a modem to connect to the
Internet.
• Use your phone to send and receive data calls
from your computer or handheld device.
12.12.1 Installing the Software
To transfer data between your phone and computer,
you must install the Utility Software. See the user's
guide included on the Utility Software CD-ROM for
more information.
12.12.2 Making a Data Call
Use this procedure to send data from a connected
computer or hand-held device using a CSD or GPRS
network connection.
Action
1
Make sure that the phone is connected and
powered on. To connect your phone, see
page 120.
2
Open the application (such as dial-up-
networking) on your computer, and place the
call through the application.
Note: You cannot dial data numbers through
your phone's keypad. You must dial them
through your computer.
3
When the transfer is complete, end the call
from the connected device to close the
connection.
Getting More Out of Your Phone
12.12
117
Advertisement
Table of Contents
