Making Data And Fax Calls; Adjusting Network Settings - Motorola V220 GSM Manual

Press To
1 S
scroll to the charge time
2 SELECT (+)
confirm your selection
Note: This feature may not work with all car ignition
switches.

Making Data and Fax Calls

An optional Motorola Original™ data kit (which
includes a cable connector) lets you transfer data
between your phone and a computer, Palm OS
compatible device, or Microsoft
Pocket PC, or Handheld PC device. You can:
• Use your phone as a modem to connect to the
Internet.
• Use your phone to send and receive data and fax calls
from your computer or handheld device.
Making a Cable Connection
Installing the Software
To transfer data between your phone and computer, you
must install the software included with the Motorola
Original™ data kit. See the data kit user's guide for more
information.
Attaching the Cable
Use a Motorola Original™ serial cable or Motorola Original
USB cable to connect your phone to the external device.
Note: Not all devices are compatible with a cable
connection. Check your computer or hand-held device to
determine the type of cable you need.
USB Cable
Action
1 Plug the end of the
cable with the USB
logo into the phone's
accessory connector
port. Make sure that
the logo and the
phone are both
facing you.
2 Plug the other end—the USB connection—into
the USB port on the device.
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
computer or hand-held device using a CSD or GPRS
network connection.
® ®
Windows CE,
040030o
Action
1 Make sure that the phone is connected and
powered on.
2 Open the application (such as dial-up-
networking or fax) on your computer, and place
the call through the application.
Note: You cannot dial data or fax numbers through
your phone's keypad. You must dial them through
your computer, unless you are making a talk then fax
call (see following section).
3 When the transfer is complete, end the call from
the connected device to close the connection.
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Transferring the Data or Fax
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
Ending the Data/Fax Connection
When the data or fax transfer is complete, end the call
from the connected device to close the connection.
Making a Talk Then Fax Call
You can place a call where you talk and then send
a fax to the same phone number within the same
032380o
call.
Connect to the device that will send the fax, and do the
following:
Press To
1 keypad keys enter the phone number
2 M
open the Dialing Menu
3 S
scroll to Talk Then Fax
4 SELECT (+) select Talk Then Fax
Your selection applies to the
next call only.
5 N
make the call
Speak and, when ready,
initiate the fax transfer on the
connected device. When the
transfer is complete, end the
call from the connected
device.

Adjusting Network Settings

Your service provider registers your phone to its
network. In some situations, such as using the
032380o
phone as a modem, you may need to change the
network registration.
Note: Some settings and/or options described in this
section may not be available for all phone models.
27