Maintenance Introduction The Versa Flex Dinette is a dinette with a fixed shelf and a sliding table. The sliding table can be moved left, right, forward, and backward, to provide a versatile and space-efficient dining surface or workspace. Additional information about this product can be obtained from lci1.com/support or by downloading the free LippertNOW app.
Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the Lippert limited warranty. The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause death or serious personal injury if not performed safely and within the parameters set forth in this manual.
Operation The Versa Flex Dinette's sliding table (Fig. 1A) can be moved forward, backward, left or right to maximize interior space (Fig. 2). The shelf (Fig. 1B) stays in place. Fig. 2 Fig. 1 Removing and Reinstalling the Sliding Table The sliding table can be removed and reinstalled if necessary.
To reinstall the sliding table, reverse Steps 1-4. Fig. 5 Maintenance The Versa Flex Dinette requires very little maintenance. It is not necessary to lubricate the sliding components. The only required maintenance is to keep the wall guide track clear of debris. Page 5 Rev: 07.09.24...
Page 6
Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available for free download from lippert.com.
Need help?
Do you have a question about the Versa Flex Dinette and is the answer not in the manual?
Questions and answers