Switching Off The Appliance - JUNO JKU 6425 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

An increase in the temperature in the freezer may be caused by
– frequent or extended opening of the door;
– storing large quantities of warm food;
– a high ambient temperature;
– a malfunction in the cooling system.
0 Switch off the warning tone by pressing the fast freeze button.
The yellow fast freeze light illuminates. The red warning light
remains illuminated until the required temperature has been rea-
ched again.
0 After the storage temperature has been reached, press the fast
freeze button again to switch off the fast freeze function. The yel-
low light goes out.
Note: when the appliance is switched on for the first time, the
warning light and the warning tone signal an alarm because the
necessary storage temperature in the freezer has not yet been
reached.

Switching off the appliance

0 To switch off the appliance, turn the temperature regulator to
position "0".
If the appliance is not going to be used for an extended
period:
0 Switch off the appliance by turning the temperature regulator to
position "0".
0 Remove the mains plug or switch off or turn out the circuit brea-
ker or fuse.
0 Defrost freezer and clean thoroughly (see section: "Cleaning
and Care").
0 Leave the door open to avoid the build up of odours.
42

Advertisement

Table of Contents
loading

Table of Contents