Contents Instructions for the user Instructions for the installer Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Electrical connection Door reversal, pannelling instructions Cleaning the interior Door reversal Operation Pannelling the door Temperature regulation Installing the appliance under...
Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
In Temperature regulation this case the dial must be set to a higher temperature to reduce energy The temperature is automatically regulated and can consumption.
To obtain the best performance: do not store warm food or evaporating liquids in the refrigerator; do cover or wrap the food, particularly if it has a strong flavour. Position food so that air can circulate freely round it. Useful hints: Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer.
The opening on the diffuser gives access to the light bulb. Periodic clearing If the light does not come on when the door is opened, check that the bulb is screwed in properly; replace the bulb if the fault persists (the maximum Never use metal objects for clearing your appliance bulb wattage is shown on the light diffuser).
Proceed as follows: 1. Remove bottom hinge (4). 2. Remove door (8). 3. Remove pivot (3) from the top hinge and refit it in the outer hole of the hinge on the opposite side. 4. Refit the door and the bottom hinge.
Refer to the figure for required dimensions. Supplied with the appliance is a kit including a venting grille (B) and two brackets (A) to fix the appliance to the kitchen unit. 1. Fit the two brackets on the upper hinges (see detail, Fig.) and fix them by means of the screws supplied...