Advertisement

Quick Links

JKU 1128
GEBRAUCHSANWEISUNG
OPERATING INSTRUCTION
D
2222621-57

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JKU1128 and is the answer not in the manual?

Questions and answers

Summary of Contents for JUNO JKU1128

  • Page 1 JKU 1128 GEBRAUCHSANWEISUNG OPERATING INSTRUCTION 2222621-57...
  • Page 2: Safety Instructions

    Maintenance Defrosting / Cleaning / Changing the light bulb ....... .
  • Page 3: Use And Control

    Instructions for the use of the instructions booklet Notes which are important for your safety or for the proper functioning of the appliance Supplementary information regarding operation and practical applications of the appliance. Tips and notes concerning economical and environmentally sound use of the appliance...
  • Page 4 Hints for refrigeration ¥ Please do the same in reverse to insert the shelf at a different height. ¥ Do not store warm food or evaporating liquids in...
  • Page 5: Maintenance

    Changing the light bulb automatically; the defrosting water which has collected in the tray below the evaporator must ¥ Should the interior light fail to work, first switch off however be removed. the appliance and disconnect from the electricity Never use sharp metal tools to scrape off supply, then replace the bulb.
  • Page 6: Something Not Working

    Something not Working Problems may be due to causes which can easily be solved before calling the Technical Service. Please follow these instructions: SYMPTOM SOLUTION Door does not close Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out.
  • Page 7: Installation

    Positioning consulting a specialist technician. Manufacturer declines ¥ Unpack the cabinet and check that it is in good responsibility above safety condition and free of any transport damage. precautions are not observed.
  • Page 8: Building In The Appliance

    2. Remove door (8). 2. Loosen, without removing them, all remaining 3. Remove pivot (3) from the top hinge and refit it in screws securing the door frame. the outer hole of the hinge on the opposite side.

Table of Contents