Product Description - Nice SingleSmart-Control Instructions And Warnings For Installation And Use

3

PRODUCT DESCRIPTION

The remotely operated NICE SingleSmart-Control is designed to turn electrical devices or circuits on and off.
SingleSmart-Control enables the control of one device or a circuit.
The compact size of this product enables its installation in the housings of other devices.
The device can be controlled either using the Z-Wave® network or with buttons connected directly to the device.
3.1 - Main features
• The device works with various types of switches and buttons.
• It supports the Z-Wave® network security modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
• It works as a Z-Wave® signal repeater (all non-battery operated devices within the network act as repeaters to increase reliability of the
network).
• It can be used with all devices with the Z-Wave Plus® certificate and should be compatible with such devices produced by other manufac-
turers.
Note
• IEC certification is applicable in the EU countries and in most countries using 220-240 V~.
• UL certification is applicable in the United States and in most countries using 100-120 V~.
• The device is a Security Enabled Z-Wave Plus® product and a Security Enabled Z-Wave® Controller must be used in order to fully utilize the
product.
3