Unit Description; Front Panel (See Operation Manual); Rear Panel - Fagor NC-200 PB - INSTALLATION V0111 Installation Manual

Hide thumbs Also See for NC-200 PB - INSTALLATION V0111:
Table of Contents

Advertisement

1.

UNIT DESCRIPTION

This unit is especially designed to be used on punch presses. It allows displaying
the position of the X and Y axes, controlling them as well as the raising device
(H), editing and executing part programs etc. The axes may also be moved
manually from the dro keyboard or externally with footswitches.
1.1

FRONT PANEL (SEE OPERATION MANUAL)

1.2

REAR PANEL

1
2
3
Dimensions of the Built-in model (in mm):
On the back of the unit, the following items may be found:
1.- Power switch.
2.- Three-prong power connector for AC and ground connection.
3.- M6 mm terminal for general machine ground connection.
NC-200 PB - Installation Manual - Page: 11

Advertisement

Table of Contents
loading

Table of Contents