Printer Will Not Turn On; Printer Prints Garbled Information; Printer Will Not Print; Solving Keyboard And Mouse Problems - HP Z2 Mini G9 Maintenance And Service Manual

If you are on a network, you might not have
made the connection to the printer.
Printer might have failed.

Printer will not turn on

Use this information to troubleshoot the computer.
Cause
The cables might not be connected properly.

Printer prints garbled information

Use this information to troubleshoot the computer.
Cause
The correct printer driver for the application is
not installed.
The cables might not be connected properly.
Printer memory might be overloaded.

Printer will not print

Use this information to troubleshoot the computer.
Cause
The printer might be out of paper.

Solving keyboard and mouse problems

If you encounter keyboard or mouse problems, see the documentation that came with the equipment
and the common causes and solutions listed in these tables.

Keyboard commands and typing are not recognized by the computer

Use this information to troubleshoot the computer.
Cause
Keyboard connector is not properly
connected.
Program in use has stopped responding
to commands.
Keyboard needs repairs.
Computer is in the Sleep state.
Make the proper network connections to the printer.
Run printer self-test.
Solution
Reconnect all cables, and check the power cord and electrical outlet.
Solution
Install the correct printer driver for the application.
Reconnect all cables.
Reset the printer by turning it off for 1 min, and then turn it back on.
Solution
Check the paper tray, and refill it if it is empty.
Solution
Shut down the computer, reconnect the keyboard, and then restart the
computer.
Shut down your computer using the mouse, and then restart the
computer.
See the Worldwide Limited Warranty for terms and conditions.
Press the power button to resume from the Sleep state.
IMPORTANT: When attempting to resume from the Sleep date, do not
hold down the power button for more than 4 seconds. Otherwise, the
computer will shut down, and you will lose any unsaved data.
Printer will not turn on 49