Computer Setup Security - HP Z2 Mini G9 Maintenance And Service Manual

Table 6-1 Computer Setup Main (continued)
Option
Update System BIOS
Change date and time
System IDs
Replicated Setup
Save Custom Defaults
Apply Custom Defaults
and Exit
Apply Factory Defaults
and Exit
Ignore Changes and Exit
Save Changes and Exit

Computer Setup Security

This table provides information about the Computer Setup Security menu.
NOTE: Support for specific Computer Setup options can vary, depending on the hardware
configuration.
Description
Network Configuration Settings
Lets you configure the network connection to the server that is the host for system firmware
updates.
Update BIOS Using Local Media
Lets you access files on either USB storage or the hard drive. The HP BIOS Update and Recovery
application included in BIOS Softpaqs at www.hp.com copies the BIOS file to the correct location on
the hard drive or USB device.
Lets you update system date and time.
Let you set the following values:
● Asset Tracking Number
● Ownership Tag
Back up current settings to USB device
Saves system configuration to a formatted USB flash media device.
Restore current settings from USB device
Restores system configuration from a USB flash media device.
Saves the current system configuration settings as the custom default set.
Applies the custom default settings to the computer after rebooting. Does not apply to options in the
Security menu.
Restores the factory system configuration settings to the computer after rebooting. Does not apply
to options in the Security menu.
Exits Computer Setup without applying or saving any changes.
Saves changes to current system configuration, exits Computer Setup, and reboots.
Computer Setup Security 63