Preparations; Connections - Aiwa XR-MR5 Operating Instructions Manual

PREPARATIONS

CONNECTIONS

Check your accessories
Remote control AM loop antenna
Operating Instructions, etc.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment first.
Finally, connect the AC cord.
• There are no differences between the two speaker units. Both
speakers can be connected as L (Left) or R (Right).
4
ENGLISH
1 Connect the speaker cords to the main unit.
The cords with the white stripes should be connected to the
terminals and the other cords to the
FM antenna
2 Connect the supplied antennas.
Connect the FM antenna to the FM 75
loop antenna to the AM LOOP terminals.
2 2
1 1
AM loop antenna
2 2
1
3
terminals.
terminals and the AM
FM antenna