Aux Mode; Bt Mode - auna Select Two 2.1 Manual

EN
64

AUX MODE

In AUX mode, audio can be played from external sources such as an MP3
player. To play music in AUX mode, proceed as follows:
1. Connect the external audio device to the AUX-IN connector.
2. Select AUX mode by pressing the SOURCE button or select Menu >
Main menu > AUX IN.
3. Adjust the volume on the internet radio (and on the external audio
device if necessary).

BT MODE

Before pairing, make sure that the Internet radio is not already connected to
another BT device. External devices may differ in the way they connect.
The following is a general guide on establishing a connection:
4. Press the SOURCE button to select BT mode. This activates BT. Rotate
the volume control to approx. ¼ of the available volume and also turn
up the volume of the external BT device used.
5. Activate BT on the external BT device.
6. Call up the device list of the external BT device and select MS5 to
establish the connection.
7. Once connected, you can play music files from your external BT device
via Internet radio. Adjust the volume, if necessary, on both devices.