Advertisement
Quick Links
Scope:
To Mount a PD168-065 J-Hook Mount to a PDI-A24A, PDI-A32A, or PDI-A43A TV in a PDI-179 or PDI-179AV wall
mount.
Note: The maximum capacity for this mount is 32 pounds.
Tool List:
1.
P1 or P2 Phillips Screwdriver
1/8" Hex Wrench
2.
3.
Safety Glasses/Goggles
Safety Steps:
1.
Always wear safety glasses/goggles to prevent injury from debris.
2.
Follow the installation/removal instructions for you existing products.
Bill of Material:
Item
Part Number
1
PD168-065
2
PDIPPHMSM6X110
Procedure:
Step 1:
Mount the wall mount, PDI-179 or PDI-179AV, to the wall following the installation instructions included with the
mount, (PD196-047 or PD196-393).
Step 2:
Attach the J-Hook mount, PD168-065, (#1) to the TV using four (4) screws, PDIPPHMSM6X110, for PDI-A32A and
PDI-A43A TVs as shown below. Be sure to align the correct slots on the J-Hook mount, PD168-065, with the VESA
pattern on the back of the TV, see reference dimensions below.
Note: Use customer supplied M-4 screws to mount a PDI-A24A TV.
MODEL NUMBER:
PD168-065
Installation Instructions
Description
J-Hook Articulating Mount
Screw, Phillips Pan Head, M6-1 x 10mm
Document Number:
PD196-431R1
Page 1 of 2
QTY
1
4
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PDi PD168-065
Summary of Contents for PDi PD168-065
- Page 1 Attach the J-Hook mount, PD168-065, (#1) to the TV using four (4) screws, PDIPPHMSM6X110, for PDI-A32A and PDI-A43A TVs as shown below. Be sure to align the correct slots on the J-Hook mount, PD168-065, with the VESA pattern on the back of the TV, see reference dimensions below.
- Page 2 Installation Instructions Page 2 of 2 Step 3: Seat the J-Hook Mount, PD168-065, (#1) into the wall mount, PDI-179 or PDI-179AV, and tighten the pilfer proof screw. Step 4: To adjust the tilt of the TV, support the weight of the unit and loosen both adjustment screws, one on each side shown below, using a 1/8”...
Need help?
Do you have a question about the PD168-065 and is the answer not in the manual?
Questions and answers