PDi PD168-089 Installation Instructions

Scope:
To Mount a PD168-086 J-Hook Mount to a 100x100 VESA, 100x200 VESA or 200x200 VESA TV in a PDI-179 or PDI-179AV wall mount or to mount a
PD168-087 J-Hook Mount to a 400x400 VESA TV in a PDI-179 or PDI-179AV wall mount or to mount a PD168-089 J-Hook Mount to a 200x300 VESA or
a 200X400 VESA TV.
Notes:
1. The maximum capacity for this mount is 55 pounds.
2. This mount cannot be used with a PDI-A55A TV, due to the VESA pattern, contact PDi using information at the end of the document for
questions.
3. The TVs used in the graphics are used as reference only and are not included with the kits listed.
Tool List:
1. P1 or P2 Phillips Screwdriver
1/8" Hex Wrench
2.
3. Safety Glasses/Goggles
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
VESA Pattern Chart:
PDi TV VESA Pattern (mm)
PDI-A24 100x100
PDI-A32 100x200
PDI-A43 200x200
PDI-A55 400x400
PDI-A65 200x300
PD168-086 Installation Instructions
Bill of Material:
Item Part Number
1 PD168-086
2 PDIPPHMSM6X110
Procedure:
Step 1:
Mount the wall mount, PDI-179 or PDI-179AV, to the wall following the installation instructions included with the mount, (PD196-047 or PD196-396).
Step 2:
Attach the J-Hook mount, PD168-086, (#1) to the TV using four (4) screws, PDIPPHMSM6X110, for PDi TVs with a 100x200 VESA or a 200x200 VESA
as shown below. Be sure to align the correct slots on the J-Hook mount, PD168-065, with the VESA pattern on the back of the TV, see reference
dimensions below.
Note: Use customer supplied M-4 screws to mount a PDi TV with a 100x100 VESA.
MODEL NUMBER:
PD168-086 & PD168-087 &
Installation Instructions
Description
J-Hook Articulating Mount
Screw, Phillips Pan Head, M6-1 x 10mm
PD168-089
QTY
1
4
Document Number:
PD196-441R2
Page 1 of 3