Advertisement
Table of Contents
Better Solutions Are Within Reach
SAFETY STEPS:
1) Always wear safety glasses/goggles to prevent injury from debris.
2) Follow the installation/removal instructions for your existing products.
TOOL LIST:
1) P1 or P2, phillips screw driver
2) 1/4 " hex bit driver
3) PD219-128 (supplied with kit) TORX T20 hex bit
4) Safety glasses/goggles
PARTS LIST:
1) PD181-682 wall mounting plate for PDI-DVD-SH
2) PDITPHMSM4X76 : TORX pan head machine screw M4-.7 x 6mm.
3) PD219-128 : TORX T20 hex bit
PROCEDURE:
STEP 1:
Remove the top cover by pressing down above the ribbed
arrow located on the top front edge to release the snap tab.
Save to reinstall later.
STEP 2:
Mount the PD181-682 bracket to the wall using four
#8 sized fasteners and appropriate wall anchors.
These fasteners/anchors are not supplied with the
mount.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD181-682
Thin Wall Mount for PDI-DVD-SH
®
Document Number:
PD196-164R2
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for PDi PD181-682
Summary of Contents for PDi PD181-682
- Page 1 STEP 2: Mount the PD181-682 bracket to the wall using four #8 sized fasteners and appropriate wall anchors. These fasteners/anchors are not supplied with the mount. PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
- Page 2 Make cabling and power connections and test functions. Reinstall the top front cover that was removed during the first step. Route cables thru this strain relief opening to make connections. PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
Need help?
Do you have a question about the PD181-682 and is the answer not in the manual?
Questions and answers