PDi PD168-046 Installation Instructions

Better Solutions Are Within Reach®

Installing TV on arms

SAFETY STEPS:

1) Always wear safety glasses/goggles to prevent injury from debris.
2) Follow the installation/removal instructions for your existing products.

TOOL LIST:

1) P1 or P2, Phillips screw driver
2) ¼" wrench
3) Safety glasses/goggles

STEP 1: Mounting The Channel to the Swivel:

1) Place one a ¼" Flat Washer (PDIFW25) and Washer (PDI-272) onto a ¼-20 X 30" Bolt (PDIHHCS
2520 192).
2) Place the Bolt/Washer combination into the hole on the right side of the Mounting Channel.
3) Place Friction Washer (PDI1172) on end of bolt.
4) Slide the Swivel Stem into the Mounting Channel and push the bolt through the swivel stem, but not
through the left side Mounting Channel hole.
5) Slide the second Friction Washer between the swivel stem and left side of the Mounting Channel.
6) Push bolt through Friction Washer and left side whole of Mounting Channel.
7) Place Washer (PDI272), ¼" Flat Washer (PDIFW25) and ¼-20 Stover Lock Nut (PDISLN2520) on
other end of bolt.
8) Wrench-tighten lock nut until desired tension is obtained.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD168-046 Dual Monitor Mount
INSTALLATION INSTRUCTIONS
Document Number:
PD196-216R2
Page 1 of 2