Advertisement
INTRODUCTION
This document provides the information to assemble and install a PD168-059 Dual Monitor Mount provided by
PDi Communication Systems. These instructions cover the standard design of the pendant mount and any
customizations that have been included may not be specifically outlined in these instructions.
SAFETY
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
TOOLS REQUIRED
1. Phillips screwdriver
2. 3/16" and 7/16" hex wrenches
3. Safety glasses/goggles
INSTALLATION
Included Hardware:
•
8 each; PDIPPHMSM4X710 – Screw, M4 x 10mm Long, Phillips Pan Head
1. Unpack the P19A TV (sold separately) and place on workbench face down. If necessary, place protective
mat on workbench to ensure the viewing surface is not damaged.
2. Place the 15.6" Teguar Tablet (not provided by PDi) facedown next to the P19A TV so that it is on the
right as shown in Figure 1.
PDI-P19A TV
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Installation Instructions
FIGURE 1. MONITOR ARRANGEMENT
BOTTOM OF MONITORS
15.6" Teguar Tablet
www.pdiarm.com
and
www.mymedTV.com
Document Number:
PD196-399R2
Page 1 of 6
▪ Phone 800.628.9870
Advertisement
Table of Contents
Related Manuals for PDi PD168-059
Summary of Contents for PDi PD168-059
- Page 1 1. Unpack the P19A TV (sold separately) and place on workbench face down. If necessary, place protective mat on workbench to ensure the viewing surface is not damaged. 2. Place the 15.6” Teguar Tablet (not provided by PDi) facedown next to the P19A TV so that it is on the right as shown in Figure 1.
- Page 2 1.25” hole in the VESA mounting bracket for each monitor. FIGURE 3. CONNECTING THE DUAL MOUNT ARM Feed cables from P19A TV through this opening. PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com www.mymedTV.com...
- Page 3 (4 per Monitor) 6. Attach the Dual Mount Arm to the nose of the PDI arm using the socket head cap screw, PD209-002, and lock washer, PDISLW25, from the Swivel Assembly in the Dual Mount Arm, as shown in Figures 5A &...
- Page 4 8. Confirm the devices are working properly. Reinstall the cover that was removed in Step 3 (see Figure 2). PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com...
- Page 5 FIGURE 6A. UNSCREWING THE HEX BOLT 3. Rotate the entire upper swivel assembly one-hundred-eighty degrees. Refer to Figure 6B. FIGURE 6B. ROTATING THE SWIVEL PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com...
- Page 6 WARRANTY PDi Communication Systems Inc., (“PDi”) standard warranty information is found at pdiarm.com. For information regarding authorized servicing and all other information pertaining to this warranty, please contact PDi COMMUNICATION SYSTEMS, INC. at 40 Greenwood Ln, Springboro, Ohio 45066 or phone 800-628-9870 and ask for the PDi ProServices team.
Need help?
Do you have a question about the PD168-059 and is the answer not in the manual?
Questions and answers