PDi PD168-051 Installation Instructions

Better Solutions Are Within Reach

Scope:

To install the PD168-051 wall mount kit to a PDi ELED television.

Tool List:

1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
3. Level
4. 1/4" hex bit driver

Safety Steps

1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for existing products.

Installation Procedure:

1. Select a location on the wall approximately 4 inches mounting distance for plastic 29" TV,
approximately 7 inches mounting distance for plastic 32" TV, and approximately 9 inches
mounting distance for metal 32" TV. Position PD181-697 bracket, level, and locate two
mounting holes. Secure the bracket to the wall (mounting hardware is not included). (Fig. 1)
2. Attach PD181-596 bracket to PD181-677 adapter plate using (4) each PDIPPHMSM4X76 screws
and #10 internal tooth lock washers. (Fig. 2)
Fig. 1
Qty Part Number
1 PD181-596
1 PD181-677
1 PD181-697
1 PD196-269
2 PD218-001
1 PD219-020
2 PDIPPBHSCS103250
4 PDIPPHMSM4X76
4 PDIITLW10
4 PDIPPHMSM5X810
4 PDIPPHMSM6X110
4 PDIPPHMSM6X18
4 PDIFW10
4 PDIPPHMSM4710
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD168-051 100mm x 200mm
Wall Mount Installation Instructions
®

Parts List

Description
100mm Mounting Bracket to LCD
100mm x 200mm Adapter Plate
Vertical Wall Mount Bracket
Installation Instructions
8" ty-wrap
Tamper Resistant Hex Bit
Pilfer Proof 10-32 x 1/2 Button Head Socket Screw
M4 x .7 x 6mm Long Phillips Head Screw
#10 Internal Tooth Lock Washer
M5 x .8 x 10mm Long Phillips Head Screw
M6 x 1 x 10mm Long Phillips Head Screw
M6 x 1 x 8mm Long Phillips Head Screw
#10 Flat Washer
M4 x .7 x 10mm Long Phillips Head Screw
Document Number:
PD196-269R3
Page 1 of 3
The PDIFW10 AND
PDIPPHMSM4710
washers and screws
are included to be used
if this adapter plate is
being paired with a TV
that requires M4
mounting screws.