Download Print this page
PDi Reach 17 Installation Instructions

PDi Reach 17 Installation Instructions

Advertisement

Quick Links

A Leader in Patient Communication
Solutions™
SAFETY INFORMATION
Overhead Falling Hazard
TV can pose a striking hazard when mounted at an
elevated position. Use only PDi mounting brackets,
support arms, and appropriate hardware to assure TV will
not fall from the mounted position. Failure to do so may
cause injury or death.
Rain and Moisture
WARNING: To avoid the hazards of fire or electrical shock,
DO NOT expose this apparatus to rain or moisture.
Oxygen Environment
WARNING: Do not use in any oxygen tent or oxygen
chamber. Such use may cause a fire hazard.
Wet Location
Do not use this apparatus near water. Apparatus shall not
be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Note to Cable TV Installer
This reminder is provided to call the cable TV systems installer's
attention to Article 820-40 of the National Electrical Code. The code
provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of
the building, as close to the point of the cable entry as practical.
Canadian installations shall be properly grounded in accordance with
the Canadian Electrical Code, Part 1.
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
MODEL NUMBER:
PD168-066
Reach 17 Installation Instructions
FCC
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in residential or
commercial installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Cleaning and Disinfection
Clean the exterior of this apparatus by removing dust with a lint-free
cloth. Suggested cleaning agent is 5% Bleach and Water solution.
CAUTION: To avoid damage to the surface of the television, do not use
abrasive or chemical cleaning agents: Spot test a new disinfectant by test
cleaning a non-obvious small spot on the cabinet. Allow the disinfectant
to soak per its instructions and then wipe clean. Do not use the
disinfectant if the TV's surfaces show any sign of discoloration or
softening. Do not immerse this apparatus.
Disconnecting Device from Mains
The main plug or an appliance coupler is used as the disconnecting device,
the disconnect device shall remain readily operable.
Trademarks
Manufactured under license from Dolby Laboratories, Dolby and the
double-D symbol are trademarks of Dolby Laboratories. All other brand
names and product names used in the manual are trademarks, registered
trademarks, or trade names of their respective holder. "PDi" is a
registered trademark of PDi Communication Systems, Inc. All rights
reserved.
Underwriters Laboratories
The model PDI-871-B/C/G Slim Power Mount is specialized apparatus and
should be installed to National Electrical Code specifications.
This device is safety tested and listed by the
Underwriters Laboratories as a product suitable for
use in healthcare facilities in both the United States
and Canada.
www.pdiarm.com
Document Number:
PD196-409R1
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
and
www.mymedTV.com
Page 1 of 5
▪ Phone 800.628.9870

Advertisement

loading
Need help?

Need help?

Do you have a question about the Reach 17 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PDi Reach 17

  • Page 1 This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use in healthcare facilities in both the United States and Canada. PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com www.mymedTV.com...
  • Page 2: Important Safety Instructions

    à des tensions dangereuses ou à d'autres dangers. Confiez toute réparation à un personnel qualifié. PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com...
  • Page 3: Tool List

    1. Select the location where the Reach 17 Wall Plate will be located. (Note that the power cord for the PDI-750AS-B power supply is 6ft long.) 2. Pre-Drill the holes to mount the Reach 17 Wall Plate as shown in the figure below. Holes will need to be vertical, relative to each other.
  • Page 4 Page 4 of 5 Solutions™ 3. Mount the Reach 17 Wall Plate using the recommended screws. Install the washer, PDI-272, under the head of the lower mounting screw. See figure below. 4. Attach the arm to the wall plate, as shown, using the #8-32 nylon locking nuts provided. Tighten the nuts to 8-10in-lbs torque.
  • Page 5 Page 5 of 5 Solutions™ 6. If they are not already removed, remove the knockouts from the back of the housing for the PDI-750AS Power Supply. 7. Attach the PDI-750AS Power Supply to the wall plate, as shown, using the #1/4”-20 nylon locking nuts provided.

This manual is also suitable for:

Pd168-066