Parameters Accessible From The Oscilloscope Or Oem Subroutine; Axis Parameters That May Be Modified From The Oscilloscope; General Parameters Modifiable From The Oscilloscope; Machine Parameters Modifiable From An Oem Program - Fagor 8040 TC CNC Manual

i
8 Parameters accessible from the oscilloscope or OEM
subroutine
8.1

Axis parameters that may be modified from the oscilloscope

8.2

General parameters modifiable from the oscilloscope

8.3

Machine parameters modifiable from an OEM program

Software compatibility with respect to version V8.11:
• When updating from a version older than V8.11.
It maintains the values of the error in the positive direction of the
tables and assigns a zero error in the negative direction to all the
points.
• When changing to a version older than V8.11.
It maintains the error values in the tables in the positive direction, but
it loses the ones in the negative direction.
The following axis machine parameters may be modified.
Indicate the axis and the parameter number separated by a dot.
Example: [X.P18], [Z.P23].
Number Parameter
P42 MAXFEED
P43 JOGFEED
The following general machine parameter (needed to adjust the
machine) may be modified from the oscilloscope.
Enter the indicator of the general parameter and the parameter
number separated with a dot. Example: [G.P161].
Number Parameter
P161 TLOOK
All the parameters modifiable from the oscilloscope can also be
changed from an OEM program using the following variables.
MPGn
MPSSn
The new values are updated according to the tables described in
chapter
30 Oscilloscope function
[RESET] or [SHIFT]+[RESET] to update the values.
Update
Beginning of the next block
Beginning of the next block
Update
Beginning of the execution of a program.
MP(X-C)n MPSn
MPASn MPLCn
It is not necessary to press
N F
EW EATURES
(S T: 8.1 )
OFT X
Parameters
accessible from the
oscilloscope or
OEM subroutine
Page 43 of 46