Tc Model. Modifications In The Turning Cycle - Fagor 8040 TC CNC Manual

Program in execution or interrupted.
Program in tool inspection.
Rest of cases (program neither in execution nor in tool inspetion)
The I and K values
Warning

35 TC model. Modifications in the turning cycle

N F
EW EATURES
(S T: 8. )
OFT XX
Finishing stock
TC model.
Modifications in
the turning cycle
Page 28 of 46
When editing the active tool, it is possible:
To modify the I and K data.
Select another tool (T xx Recall) and modify its I and K data.
When NOT editing the active tool, it is possible:
To modify the I, K and D data.
Select another tool (T xx Recall) and modify its I, K and D data.
When editing the active tool, it is possible:
To modify the I and K data.
Select another tool (T xx Recall) and modify its I and K data.
Change the active tool (T xx Start).
When NOT editing the active tool, it is possible:
To modify the I, K and D data.
Select another tool (T xx Recall) and modify its I, K and D data.
Change the active tool (T xx Start).
When editing the active tool, it is possible:
Modify all the data.
Change the active tool (T xx Start).
When NOT editing the active tool, it is possible:
Modify all the data except the part dimensions.
Change the active tool (T xx Start).
The values entered in the I, K fields are incremental, they are added
to the ones already in the table. The "I" data is given in diameter.
The new g.m.p. "MAXOFFI (P165)" and "MAXOFFK (P166)" indicate
the maximum value that may be entered in each field. When trying
to enter a greater value, the relevant message will be displayed.
To assume the new I and K values, select the tool again.
It is now possible to define the finishing stock in X and Z.