Remote Control - Aethra Vega X7 Use And Installation Manual

Remote control

In order to avoid un-desired controls reaching other systems, user can modify
Note
transmission power from 2mt to 20mt (default) by means of a switch in the
battery space:
Move both the Switches to-ON position
Move both the Switches to -OFF (1,2) position
Remote control
Remote control controls all system functions (see "Remote control" chapter)
Remote control uses 2 (two) 1.5V AAA alkaline batteries, and an alert appears on the status bar when
batteries are low; user can change the batteries opening the cover on the remote control rear.
20mt
2mt
15