H.320; Broadcast - Aethra Vega X7 Use And Installation Manual

H.320

This menu contains the following configuration settings:
Audio Number = Video Number:
In a non-aggregated ISDN call, the audio number may be different from the video number. If
this checkbox is not selected, the System will request the video number and offer by default the
same number as the one used by audio.
Additional Calls:
Select automatic or manual configuration of additional calls
Mode:
Allows you to set the call mode to 64K or 56K.
TCS4 Delimiter:
definition of TCS4 calls delimiter: "#" or "*".
TCS4 is a special routing method for direct video call when a Gateway is present on the
network (ISDN network to IP network).
To place a call using a TCS4 extension, do the following:
1. Obtain the following information: Gateway number, delimiter and TCS4 extension.
2. Dial the Gateway number, the delimiter and the TCS4 extension.
Example: ISDN_Gateway_number # TCS4_extension.

Broadcast

This menu contains the following configuration settings:
This option allows you to set a transmission as "broadcast" (without capabilities exchange).
Note:
In order to make a Broadcast call, the two terminals must have the same audio, video, rate
and Data (LSD) configurations.
41