Installation; Terminal Settings - Aethra Vega X7 Use And Installation Manual

Installation

From the "Home Page" select:
1. Settings.
2. Installation.
You will be prompted for a password.
The password is required to avoid accidental modifications and changes to settings.

Terminal Settings

From the Home Page select:
1. Settings
2. Installation
3. Terminal Settings
In this section you can configure terminal settings for various network interfaces.
For each interface it is possible to set, if present:
•
The maximum data "Rate" for a call (excluding NIC).
•
"Audio coding".
•
"Video coding".
•
"Bonding".
Determine if channels are to be bonded or not (ISDN only).
Note: With audio and video encoder/decoder settings set to <Auto> the system choose the
encoder/decoder based on the connection bit rate.
Moreover you can explicitly enable/disable some functionalities, in order to have the system being
compatible with old systems.
57