Empty Key - Aastra 57i CT User Manual

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific
softkey. You do this by setting the softkey to "empty". The softkeys are added in
order (from softkey1 to softkey20) after any hard-coded keys have been added. If a
particular softkey is not defined, it is ignored.
Setting an Empty Key
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 57i CT phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select Empty.
5. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
6. Click
108 Model 57i CT IP Phone User Guide
to save your changes.