VIVOTEK
Patrol Settings
You can select preset locations for the Network Camera to patrol�
Please follow the steps below to set up a patrol route:
1� Select preset locations from the list and click
�
2� The selected preset locations will be displayed on the Patrol Locations list�
3� Set the Dwelling time for the preset location during auto patrol�
4� Repeat step 1 and 3 to select additional preset locations�
5� If you want to delete a selected location, select it from the list and click
�
6� Select a location and click
to rearrange the patrol order�
7� Adjust the Auto pan/patrol speed� (1~5 seconds)
8� Click Save to enable the settings�
2010/06/17 13:44:17
7
3
2
1
5
6
8
68 - User's Manual