Vivotek 4X-SD8111 User Manual page 107

daylight_enabl <boolean>
e
daylight_dstac <boolean>
tualmode
daylight_auto string[19]
_begintime
daylight_auto string[19]
_endtime
daylight_timez string
ones
updateinterval 0,
3600,
86400,
604800,
2592000
restore 0,
<positive integer>
reset 0,
<positive integer>
restoreexcept <Any value>
net
Kuala Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo, Seoul,
Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra, Melbourne,
Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic
zone.
6/7 Check if current time is under daylight saving
time.
(Used internally)
6/7 Display the current daylight saving start time.
(product dependent)
6/7 Display the current daylight saving end time.
(product dependent)
6/6 List time zone index which support daylight saving
time.
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between NTP
automatic update intervals.
7/6 Restore the system parameters to default values
after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
7/6 Restore the system parameters to default values
except (ipaddress, subnet, router, dns1, dns2,
pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system parameters
will be restored to the default value except for a
union of the combined results.
daylight saving time in time
User's Manual - 107
VIVOTEK