Patrol Settings - Vivotek PZ8111 User Manual

Patrol Settings

You can select preset locations to arange the patrolling tour for the Network Camera�
Please follow the steps below to set up a patrolling tour:
1� Click to select one or multiple preset locations by checking their checkboxes�
2� Click the >> (Move) button to move them to the Patrol locations column�
3� Click to select a position, and manually enter a Dwelling time for the camera to stay during an auto
patrol� The default value is 5 seconds�
4. Repeat step 1 and 3 to select and configure individual patrol locations.
5� If you want to delete a selected location, select it from the list and click Remove�
6� Select a location and click Up or Down to rearrange the patrolling order�
7� Adjust the Auto pan/patrol speed� (1~5 seconds)
8� Click Save to enable the settings�
ZOOM x10 xE2
1
8
2
5
3
6
VIVOTEK
7
User's Manual - 69