Vivotek 4X-SD8111 User Manual page 141

deletedeny
start <ip address>
end <ip address>
index <value>
return <return page> Redirect to the page <return page> after the parameter is assigned. The
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
"network_accessname_<0~(m-1)>" is the accessname for stream "1" to stream "m". Please refer to the
"subgroup of network: rtsp" for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<0~m-1>_accessname>
For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
For details on streaming protocol, please refer to the "control signaling" and "data format" documents.
Remove denied IP address range from server. If start and end parameters are
specified, it will try to remove the matched IP address. If index is specified, it
will try to remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
<return page> can be a full URL path or relative path according to the current
path. If you omit this parameter, it will redirect to an empty page.
VIVOTEK
User's Manual - 141