Camera Control
This section explains how to control the Network Camera's Pan/Tilt/Zoom/Focus operation via
the control panel and how to preset locations�
Preset Locations
On this page, you can preset positions for the Network Camera to go to directly or patrol� A total of 128
preset positions can be configured.
Please follow the steps below to preset a position:
1� Adjust the shooting area to a desired position using the buttons on the right side of the window�
2� Click Set Current Position as home or Restore Home Position to Default to define your home
position�
3� Enter a name for the preset location, which allows for up to 40 characters� Click Add to enable the
settings� The preset locations will be displayed under the Preset Location list on the left-hand side�
4� To add additional preset positions, please repeat step 1~3�
5� To remove a preset position from the list, select it from the list and click
fold the list�
6� Click Save to enable the settings�
2
3
5
6
2010/05/06 13:44:17
VIVOTEK
� Click
or
to unfold or
1
Functions are the
same as the Control
Panel on the home
page�
User's Manual - 67