Vivotek 4X-SD8111 User Manual page 36

VIVOTEK
Primary DNS: The primary domain name server that translates hostnames into IP addresses�
Secondary DNS: Secondary domain name server that backups the Primary DNS�
Primary WINS server: The primary WINS server that maintains the database of computer name and IP
address�
Secondary WINS server: The secondary WINS server that maintains the database of computer name
and IP address�
Enable UPnP presentation: Select this option to enable UPnP
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,
TM
UPnP is supported by Windows XP or later. Note that to utilize this feature, please make sure the
TM
UPnP component is installed on your computer�
Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
out from a LAN� To utilize of this feature, make sure that your router supports UPnP
PPPoE (Point-to-point over Ethernet)
Select this option to configure your Network Camera to make it accessible from anywhere as long as
there is an Internet connection� Note that to utilize this feature, it requires an account provided by your
ISP�
Follow the steps below to acquire your Network Camera's public IP address�
1� Set up the Network Camera on the LAN�
2. Go to Home > Configuration > Application > Server Settings (please refer to Server Settings on page
79) to add a new email or FTP server�
3. Go to Configuration > Application > Media Settings (please refer to Media Settings on page 82)� Select
System log so that you will receive the system log in TXT file format which contains the Network
Camera's public IP address in your email or on the FTP server�
4. Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password
provided by your ISP� Click Save to enable the setting�
5� The Network Camera will reboot�
6� Disconnect the power to the Network Camera; remove it from the LAN environment�
36 - User's Manual
TM
presentation for your Network Camera
Network Camera (192.168.4.166)
TM
and it is activated�