Set Server Parameter Values - Vivotek 4X-FD7132 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Set server parameter values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
PARAMETER VALUE
<group>_<name> value to assigned Assign <value> to the parameter
update
<boolean>
return
<return page>
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
88 - User's Manual
DESCRIPTION
<group>_<name>
set to 1 to actually update all fields (no need to use
update parameter in each group)
Redirect to the page <return page> after the
parameter is assigned. The <return page> can be a
full URL path or relative path according to the
current path. If you omit this parameter, it will
redirect to an empty page.
(note: The return page can be a general HTML file
(.htm, .html) or a Vivotek server script executable
(.vspx) file. It can not be a CGI command. It can not
have any extra parameters. This parameter must be
put at end of parameter list)