Connecting A Usb Interface - Motorola LS3408-FZ20005 Product Reference Manual

7 - 2 Symbol LS3408 Product Reference Guide

Connecting a USB Interface

USB Series A Connector
USB Connection
Figure 7-1
The scanner connects with USB capable hosts including:
•
Desktop PCs and notebooks
•
Apple™ iMacs, Power Mac G4s and G5s, iBooks (North America only), PowerBooks
•
IBM SurePOS terminals
•
Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the scanner through USB:
®
•
Windows 98, 2000, ME, XP
•
Mac OS 8.5 and above
•
IBM 4690 OS.
The scanner also interfaces with other USB hosts which support USB Human Interface Devices (HID). For more
information on USB technology, hosts, and peripheral devices, visit http://www.symbol.com/usb.
To set up the scanner:
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner are the
same.
Attach the modular connector of the USB interface cable to the cable interface port on the scanner. See
1.
Installing the Interface Cable on page
Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of
2.
the IBM SurePOS terminal.
Ensure all connections are secure.
3.
Select the USB device type by scanning the appropriate bar code from
4.
Interface cable
1-3.
Figure 7-1 are examples
USB Device Type on page 7-4.