Interleaved 2 of 5 (I 2 of 5)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length. Select
lengths using the numeric bar codes in
symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. In case of an error, or
to change the selection, scan Cancel on
*
Enable Interleaved 2 of 5
Disable Interleaved 2 of 5
Appendix D, Numeric Bar
page
D-3.
I 2 of 5 - One Discrete Length
Codes. For example, to decode only I 2 of 5
Symbologies 12 - 31