Check For Decode Led; Check For Decode Led - Motorola LS3408-FZ20005 Product Reference Manual

Scanner Emulation Interface 10 - 11

Check For Decode LED

The connected decoder typically asserts the Decode line to signal to the Scanner Emulation host that it
successfully decoded the transmitted bar code. Some decoders, however, do not assert the Decode signal. In this
case, the scanner emits Transmit Error beeps to indicate that the bar code was not successfully transmitted. Scan
the Ignore Decode LED bar code below to disable the Transmit Error beeps.

*Check For Decode LED

Ignore Decode LED